Processing capacity: 0.65-90 t/h
Feeding size: <=25 mm
Processed material: cement, silicate products, new building materials, refractory materials, fertilizer
Matched power: 18.5-800 KW
The ball mill is a horizontal cylinder rotating device. It is the key equipment for the secondary crushing of materials after crushed. It is widely used in the dry or wet grinding of all kinds of ores and other grinding materials in the cement industry, silicate products industry, new building materials industry, refractory industry, fertilizer industry, black and non-ferrous metal processing industry and glass ceramics industry, have dry or wet grinding on a variety of ores and other grind-able materials.
Structure of ball mill:
This ball mill is composed of feeder part, discharging part, rotating part, transmission part (reducer, small transmission gear, motor, electric control), etc.. The cylinder are equipped with liner made from wear-resistant material, bearings that support the cylinder and maintain its rotation and drive parts such as motors, and transmission gears, pulleys, V-belt and so on.
> Features
1) Wide applications, simple structure and easy maintenance.
2) Large diameter inlet and outlet, high processing capacity, low cost, continuous operation
3) Cylinder liner and grinding media with strong corrosion resistance
4) Convenient installation, easy to operate.
> Technical Data
Model |
Cylinder Speed (r/min) |
Ball Charge (t) |
Feed Particle Size (mm) |
Discharge Size (mm) |
Output (t/h) |
Motor Power (kw) |
Weight (t) |
900*1800 |
38 |
1.5 |
<=20 |
0.075 - 0.89 |
0.65 - 2 |
18.5 |
3.6 |
900*2100 |
38 |
1.3-1.4 |
<=15 |
0.075 - 0.83 |
0.7 - 3.5 |
18.5 |
3.9 |
900*3000 |
38 |
2.7 |
<=20 |
0.075 - 0.89 |
1.1 - 3.5 |
22 |
4.5 |
1200*2400 |
32 |
3.8 |
<=25 |
0.075 - 0.6 |
1.5 - 4.8 |
30 |
11.5 |
1200*2800 |
32 |
3.3-3.5 |
<=25 |
0.075 - 0.6 |
2 - 6 |
30 |
13 |
1200*4500 |
32 |
7 |
<=25 |
0.074 - 0.4 |
1.6 - 5.8 |
45 |
13.8 |
1500*3000 |
27 |
8 |
<=25 |
0.074 - 0.4 |
2 - 5 |
75 |
17 |
1500*3500 |
27 |
6.75-6.4 |
<=25 |
0.075 - 0.4 |
3 - 7 |
75 |
17.5 |
1500*4500 |
27 |
14 |
<=25 |
0.074 - 0.4 |
3.5 - 12 |
110 |
21 |
1500*5700 |
27 |
15 |
<=25 |
0.074 - 0.4 |
3.5 - 8 |
115 |
24.7 |
1830*3000 |
24 |
18 |
<=25 |
0.074 - 0.4 |
4 - 10 |
130 |
28 |
1830*3600 |
24 |
10.6-11.35 |
<=25 |
0.075 - 0.4 |
5 - 22 |
130 |
33.5 |
1830*7000 |
24 |
25 |
<=25 |
0.074 - 0.4 |
7.5 - 17 |
210 |
36 |
2100*3600 |
22 |
14-15.2 |
<=25 |
0.075 - 0.4 |
15 - 36 |
370 |
46.8 |
2200*5500 |
21 |
30 |
<=25 |
0.074 - 0.4 |
10 - 22 |
210 |
48.5 |
2200*6500 |
21 |
31 |
<=25 |
0.074 - 0.4 |
14 - 26 |
380 |
52.8 |
2200*7500 |
21 |
33 |
<=25 |
0.074 - 0.4 |
16 - 29 |
380 |
56 |
2400*3000 |
20.6 |
15.5-16.6 |
<=25 |
0.075 - 0.4 |
22 - 24 |
245 |
59 |
2400*4500 |
21 |
30 |
<=25 |
0.074 - 0.4 |
8.5 - 60 |
380 |
65 |
2700*3600 |
20.6 |
39 |
<=25 |
0.074 - 0.4 |
12 - 70 |
400 |
91.3 |
2700*4000 |
20.7 |
40 |
<=25 |
0.074 - 0.4 |
12 - 80 |
400 |
94 |
2700*4500 |
20.7 |
48 |
<=25 |
0.074 - 0.4 |
12 - 90 |
430 |
102 |
3200*4500 |
18 |
65 |
<=25 |
0.075 - 0.4 |
set according to the process conditions |
800 |
137 |