Original
By certification 
Description
The micro DC gear motor that I.CH manufactures adopts series, modular design, which has a wide range of adaptability and layout plan, speed can be chosen according to the real needs.
For the gear motor that requires the production of food-grade which is used in the coffee machine, The solution that I.CH designs are to use 16mm DC motor and spur gearbox. The mini gear motor which uses cast iron gearbox has small vibration, low noise, and high energy saving. It is very reliable and can withstand certain overload capacity.
The small 16mm n20 DC geared motor that I.CH manufacturers and supplies whose rated voltage is 3V and 6V can also be used in Electronic Lock, Optic Equipment, Micro Mechanism. Our product price is very reasonable. If you have special requirements(dimensions) for high torque and low rpm geared motor, we can custom. For gear motor, we will provide high-quality service.
Advantage
(1) It offers advantages in applications with a maximum current limit, where the lowest input friction and high efficiency are essential.
(2) The inherent design of our DC gear motors results in overall better efficiency and lower noise, benefiting a wide range of applications including medical pumps, security, and access and watch winders.
(3) It is made of high-quality section steel and the gear surface is treated by high-frequency heat treatment.
(4) Due to its spur compound geartrain arrangement, the micro dc gear motor provides the output along the same axis as the motor.
Micro Gear Motor Price
The price of DC gear motor is not firm, it has many factors affecting price. For example, different parameters, material, technology difficulty have a different cost.
Appearance Size
Gearbox Specifications
Number of stages |
3 |
4 |
5 |
6 |
7 |
|
Reduction ratio |
11.1 |
22.2 |
83.3 |
200 |
600 |
|
16.7 |
33.3 |
100 |
250 |
750 |
||
50 |
150 |
300 |
900 |
|||
450 |
1350 |
|||||
Length of Gearbox(mm) |
12.8 |
14.2 |
15.6 |
17.9 |
||
DC Motor + Gearbox Specifications
Model |
Rated volt (V) |
Rated torque（kg.cm） |
Rated speed |
Rated current |
Output |
Torque at Stall |
Current at Stall |
No load |
No load |
D162-003100 |
3.0 |
0.3 |
52 |
170 |
160 |
0.8 |
450 |
70 |
60 |
D162-001050 |
6.0 |
0.12 |
200 |
250 |
250 |
1.0 |
700 |
250 |
80 |
D162-006200 |
6.0 |
0.55 |
45 |
250 |
250 |
3.0 |
700 |
60 |
80 |
D162-007300 |
6.0 |
0.7 |
25 |
180 |
180 |
4.0 |
500 |
35 |
60 |
Technical Information
Why we Use an encoder?
For the application that needs to control speed, so the encoder is required. Commonly, it is installed in the rear of the gear motor.
What is an n20 motor?
This is a manufacturer code, it has no specific meaning. You can infer that n20 represents 0.2 N.m.
http://www.ichgearmotor.com/
